Standard Layout of Your Pure Water Factory
Let’s Take a Look at Your Factory
Your pure water factory building should be a standalone structure if
possible (that means it should not be attached to a residential building
or another commercial company that makes use of toxic materials or have
toxic wastes). If you must use a building in a residence, then it must
be some distance away from the residential building, and should be
demarcated, the factory should have its own separate soak away pit from
that of the other building. The factory should have its own borehole.
Regulators often come back periodically to check this.
You Pure Water Factory should have:
•
Production Room: Fitted with air conditioner and tile. An experienced
plumber is needed to ensure a proper drainage is put in place in your
water factory. Your production room, especially is expected to be dry at
all time.
Take a look at how a typical production room should look like:
•
The production room is where your sealing machines and other production
machines will be fitted, in locating your production room; you should
also consider where the overhead tank is positioned outside the building
to avoid extra cost of plumbering.
•
A good plumber with the knowledge of setting up a pure water factory
should be engaged in doing this.
IF YOU NEED A PLUMBER AND ENGINEER TO SETUP YOUR WATER FACTORY, CONTACT: ackcity@gmail.com or call: 09081122570
•
Storage Room: The storage room should be large enough to contain what
you intend to produce per day, your loaders take their bags of water
into the delivery van from the storage room.
•
Nylon room: This room will be installed with UV light for the storage
of your nylon and bags
•
Dressing Room or Cloak: There should be separate rooms for male and
female
•
Shower Room and Toilet
•
Operator’s office: This is where visitors and clients are received. For
no reason should visitors be received in your production room, it should
be restricted area for a few workers.
Here is a hand sketch showing a standard pure water factory.
Take a look at it below:
Your pure water factory should have the above layout or close to this |
Before starting your pure water factory, please ensure to have space in
your factory compound, you need this space for parking of your vans and
also for customers who may wish to purchase water using their own
vehicles.
Take a look at picture of pure water factory setup below...
Pure water factory installation process |
Do you want to setup a water factory and you need a consultant to set up, send an e-mail to pure-water@ackcityconsultancyservices.com
Thank you Das
ReplyDeleteNice one... I appreciate
ReplyDeletei love this
ReplyDeletei will connect with you soon